Battery Removal/Replacement - Agilent Technologies E4418B User Manual

Note

Battery Removal/Replacement

The battery unit is easily removed and replaced. Follow the instructions given in
Figure 2-2. To obtain a replacement battery unit order Agilent part number E9287A
(this can only be used in power meters with option 001 installed).
WARNING
Caution
Agilent E4418B User's Guide
If the power meter is connected to an ac power source the backlight menu is
greyed out and the backlight is permanently on.
This product uses a Nickel Metal Hydride battery.
Do not short circuit the battery terminals.
Do not subject the battery to excessive heat.
Do not dispose of by burning.
Refer to your local country regulatory requirements on the disposal of
Nickel Metal Hydride batteries.
Observe static precautions while removing and replacing the battery module.
Power Meter Operation
Battery Operation (Option 001)
2-5