Troubleshooting; Service Parts; Accessories - Ariens Sno-Thro 924550 Owner's/Operator's Manual

PROBLEM
Engine will not
crank/start.
Engine stops.
Engine
problems.
Does not
operate in
Forward/
Reverse.
Small rubber
beads collect
in frame

SERVICE PARTS

Order the following parts through your
Dealer:
Part No. Description
00036800 Stens Mix Hi-Temp Grease
(3, 3 oz. cartridges)
21526400 Spark Plug
07238500 Impeller Belt
07211200 Traction Belt
51001500 Shear Bolt Kit
00300300 Friction Disc
To obtain a complete parts manual, find your
model and serial number. Then go to
www.ariens.com or call 1-800-678-5443.

TROUBLESHOOTING

PROBABLE CAUSE
1. Fuel tank is empty.
2. Build up of dirt and residue
around governor/carburetor.
3. Key Switch not in run
position.
4. Ignition switch starter circuit
not functioning.
1. Out of fuel.
2. Mechanical jam in blower
rake or impeller.
3. Polluted fuel supply.
4. Faulty spark plug.
1. See Engine Manual.
1. Friction disc not adjusted
properly.
2. Traction belt not
functioning.
1. Friction disc wear.
CORRECTION
1. Fill fuel tank.
2. Clean area around governor/
carburetor.
3. Put Key Switch into run position.
4. Check for a bad starter or
connections.
1. Fill fuel tank.
2. Turn off engine, remove key, and
wait for all moving parts to stop.
Check for and remove obstruction
and repair before restart.
3. Replace with clean fuel.
4. Replace or clean spark plug.
1. Repair or replace friction disc.
See Service and Adjustments.
2. Repair or replace traction drive
belt. See Service and
Adjustments.
1. Normal friction disc wear. Chunks
or large pieces of rubber mean
friction disc should be checked
and replaced as necessary.

ACCESSORIES

See your authorized Ariens dealer to add the
additional accessories available to your
Sno-Thro.
Part No.
73203100 Slicer Bar*
72406300 Remote Deflector Control*
72406500 Front Weight Kit*
72402200 240V Electric Start Kit*
72403600 120V Electric Start Kit
82401300 36" Rotary Brush Kit
* Available in CE countries.
GB - 26
Description