Table of Contents
Advertisement
I can't reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is EDIFICE Connected running?
The watch cannot re-connect with the
phone unless EDIFICE Connected is
running on the phone. On the phone's
Home Screen, tap the "EDIFICE
Connected" icon. Then on the watch, hold
down (B) for at least two seconds until the
second hand points to [R] twice.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the "EDIFICE Connected" icon.
Then on the watch, hold down (B) for at
least two seconds until the second hand
points to [R] twice.
Q2
I can't connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while the phone is in the Airplane Mode. After
exiting the phone's Airplane Mode, go to the
Home Screen and tap the "EDIFICE
Connected" icon. Then on the watch, hold
down (B) for at least two seconds until the
second hand points to [R] twice.
Watch Operation Guide 5666
Q3
I changed the phone's Bluetooth
from enabled to disabled, and now I
can't connect anymore.
On the phone, turn Bluetooth off and then back
on, and then tap the "EDIFICE Connected"
icon on the Home Screen. Then on the watch,
hold down (B) for at least two seconds until the
second hand points to [R] twice.
Q4
I can't connect after turning off the
phone.
Turn on the phone and then tap the "EDIFICE
Connected" icon. Then on the watch, hold
down (B) for at least two seconds until the
second hand points to [R] twice.
Phone-Watch Connection
Q1
I can't establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the "EDIFICE Connected" icon.
Then on the watch, hold down (B) for at
least two seconds until the second hand
points to [R] twice.
Has the watch been re-paired with the
phone?
After deleting pairing information from
EDIFICE Connected, re-pair them.
Unpairing
l
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
Pull out the crown to the second click.
A
Hold down (A) for at least five
B
seconds until the second hand points
to
.
e
This deletes the pairing information.
Push the crown back in.
C
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Pair the watch with the phone.
If you purchase another phone
l
22
Advertisement
Table of Contents
