Aurora Base Control - York AFFINITY OptiHeat YAW040 Installation Manual

AFFINITY SINGLE STAGE HYDRONIC WITH OPTIHEAT INSTALLATION MANUAL
The Aurora 'Base' Control System
Aurora 'Base' Control
The Aurora 'Base' Control
(ABC) System is a complete
residential and commercial
comfort system that brings all
aspects of the HVAC system
into one cohesive module
network. The ABC features
microprocessor control and
HP, LP, freeze detection, over/
under voltage faults.
Aurora uses the Modbus communication protocol to
communicate between modules. Each module contains the
logic to control all features that are connected to the module.
The Aurora 'Base' Control (ABC) has two Modbus channels
for connecting the Aurora Interface Diagnostics Tool (AID
Tool).
Aurora Control Features
Microprocessor Compressor Control
Advanced Microprocessor Features
Advanced Speed Pump Control
Variable Speed Pump
Smart Grid/Utility Input
Home Automation Alarm Input
Service Device
Aurora Interface and Diagnostics (AID)
Tool
Microprocessor control of compressor for timings with FP1, HP, LP,
Condensate, assignable Acc relay
Smart Grid, Home Automation Alarm Inputs, and Accessory2 Relay (HRV/ERV)
Microprocessor and separate power relay for loop pump and inline circuit
breakers and loop pump linking.
Capable of setup, monitoring and controlling a variable speed flow center.
Allows simple input to externally enable of occupied/unoccupied mode for
basic utility time of use programs.
Allows simple input to signal sump, security, or smoke/CO sensor alarms
from other home automation or security systems. The two inputs can be field
configured to a number of options and logic.
Allows setup, monitoring and troubleshooting of any
Aurora Control.
NOTE: Although the ABC has basic compatibility with all Aurora, new product
features may not be available on older AID Tools. To simplify the basic
compatibility ensure the version of AID is at least the same or greater than the
ABC software version.
26
Aurora 'Advanced' Control
The Aurora 'Advanced'
Control expands on the
capability of the Aurora
'Base' Control (ABC)
System by adding the
Aurora Expansion Board
(AXB). The additional
features include loop
pump linking and
variable speed pump
capability. The AXB also
features a second field
configurable accessory relay,
and two home automation
inputs that are AID configurable
for different types of alarms from sump pumps to
home security. The Smart Grid input is AID configurable
with many options to react to Utility controlled relay
operation for ON Peak optimization.
Description
Description
Aurora 'Advanced'
•
•
•
•
Dry Contact x1
Dry Contactx2
Aurora 'Advanced'
For Service
(Ver. 2.xx or greater)