Reinstall Clutch Shafts; Click For 3D Steps - Husqvarna PP492HF Workshop Manual

10.2
WS482 and WS442
1
WS482 and WS442
3
WS482 and WS442
5
86
REPAIR INSTRUCTIONS
WS482 and WS442
WS482 and WS442
2
WS482 and WS442
4
6

Reinstall Clutch Shafts

Click
for 3D
steps
First see: Remove Clutch Gear
Shafts (p. 80)
WS 440 does not have the two Idler
gear shafts (Nr�1 in orientation
picture) because it doesn't have a gear
selector�
Orientation Picture of the shafts:
1� Clutch gear shaft
2� Center gear shaft
1� Idler gear shaft
1� Make sure the gear selector switch
is in second gear�
2� Insert the gear selector arm on the
axle and turn it in place on the
gear selector�
3� Place the center gear wheel and
insert the center shaft throe the
gear wheel and knock it down
with a rubber mallet�
4� Insert the first idler gear shaft.
5� Insert the second idler gear shaft�
6� Insert the first clutch gear shaft.