Stopwatch; Measuring Elapsed Time; Measuring A Split Time - Casio 5690 Operation Manual

After Arriving
●
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping After swapping
Destination time
Destination time
Using CASIO WATCHES to Configure
l
Settings
Using Watch Operations to Configure
l
Settings
2.
Enable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
3.
Adjust the time setting.
Triggering Immediate Time Adjustment
l
Watch Operation Guide 5690
The stopwatch measures elapsed time in
1/100-second units for the first hour, and in 1-
second units after that for up to 24 hours.

Measuring Elapsed Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour
Minutes, seconds
1/100 seconds
3.
Press (A) to reset the measurement time
to all zeros.

Stopwatch

Start
Stop
Resume
Stop
After first hour
Hours, minutes
Seconds

Measuring a Split Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
If a stopwatch timing operation is in
●
progress, press (D) to stop it and then
press (A) to reset the stopwatch to all
zeros before performing the operation
in step 2.
2.
Use the operations below to measure
elapsed time.
Pressing (A) causes the display to
●
alternate between the elapsed time up
to that point (split time) and [SPL].
D
Start
A
Split
A
Split release
D
Stop
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour After first hour
Minutes, seconds Hours, minutes
1/100 seconds
3.
Press (A) to reset the measurement time
to all zeros.
Seconds
19