Liquid in the lighting or in the con-
trols can be dangerous.
The rinsing water must not drip
▶
into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use hard scouring pads or
▶
cleaning sponges.
Do not use harsh or abrasive de-
▶
tergents.
Do not use cleaning products with
▶
a high alcohol content.
If liquid gets into the drainage hole,
the evaporation pan may overflow.
The rinsing water must not get into
▶
the drainage hole.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
Never clean fittings and accessory
▶
in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 20
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings and install the ap-
4.
pliance components.
Electrically connect the appliance.
5.
→ Page 11
Putting the food into the appliance.
6.
Cleaning and servicing en
13.3 Cleaning the condensa-
tion channel and drain-
age hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
Remove the storage container.
1.
→ Page 22
Remove the shelf above the fruit
2.
and vegetable container.
→ Page 23
Carefully clean the condensation
3.
channel and the drainage hole,
e.g. using a cotton bud.
21