Searching For Digital Terrestrial Tv Chan- Nels Automatically; Searching For Digital Terrestrial Tv Chan- Nels Manually - Grundig 40 VLE 6522 BL User Instructions

SPECIAL­SETTINGS
Searching­for­digital­terrestrial­
TV­channels­automatically
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
> <
» « or » « and press »OK« to confirm.
4 Select the line »Advanced Settings« with
» « or » « and press »OK« to confirm.
V Λ
5 Select the line »Active Antenna Power« with
» « or » «.
V Λ
Switch on the antenna power supply for the
<
antenna with »
Important:
The antenna power supply (5V ) may only
7
be switched on if the antenna is an active
indoor antenna with a signal amplifier and
it is not already supplied with a voltage via
a mains plug (or similar supply). Otherwise
you may cause a short circuit and irrepara-
bly damage your antenna.
6 Select the line »Automatic Channel Search«
with » « or »
Λ V
firm.
7 Select the option »Air« with »
press »OK« to confirm.
8 Select whether to search for digital or ana-
logue TV channels.
To to this press »
option »Digital« or »Analogue« and confirm
with »OK«.
9 Press » « (red) to start searching.

Notes:
W hen updating via the same satellites a
7
security query is displayed at the start of a
search.
I f the previously stored channels should be
7
retained in the channel list and the new
channels found be added to it, then press
» « (green).

I f » « (red) is pressed, the saved channels will

7
be deleted from the current channel list.
– T he »Digital Searching« menu appears,
and the scan for TV channels begins.
– T he search is complete as soon as the
message »Search is completed!« appears.
86­ ENGLISH
­ - ---------------------------------------------------------------------------------------
>
« or » « (»On«)
« and press »OK« to con-
< >
« or »
< >
« or » « to select the
Note:
The search can be aborted with »EXIT«.
7
10 Switch to the Channel Editor with »
low) ;
or
press »EXIT« to end the setting.
Searching­for­digital­terrestrial­
TV­channels­manually
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
>
» « or »
4 Select the line »Advanced Settings« with
» « or »
V
5 Select the line »Active Antenna Power« with
» « or »
V
Switch on the antenna power supply for the
antenna with »
Important:
The antenna power supply (5V ) may only
7
be switched on if the antenna is an active
« and indoor antenna with a signal amplifier and
it is not already supplied with a voltage via
a mains plug (or similar supply). Otherwise
you may cause a short circuit and irrepara-
bly damage your antenna.
6 Select the line »Manual Channel Search«
with »
Λ
firm.
7 Select the option »Air« with »
press »OK« to confirm
– » Manual Channel Search« menu is dis-
played.
8 Enter frequency (3-digit) directly with
»1...0«.
– Search will start.
– T he search is finished when the channels
found appear in the list.
9 Press »EXIT« to end the setting.
<
« and press »OK« to confirm.
« and press »OK« to confirm.
Λ
«.
Λ
< >
« or » « (»On«)
« or » « and press »OK« to con-
V
<
« (yel-

>
« or » « and