Picture Settings - Grundig 40 VLE 6522 BL User Instructions

SETTINGS
Picture­settings­
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Activate the menu item »Picture Settings«
with »OK«.
– »Picture Settings« menu is displayed.
< TV Settings

Picture Settings

Picture Format
Picture Mode
Backlight
Advanced
Restore default display settings
4 Select the required line »Picture Mode« or
»Backlight« with »
»OK« to confirm.
Select the option with »
»BACK « to return to »Picture Settings«
<
menu.
Note:
Other settings are available under »Ad-
7
vanced«.
5 Select the line »Advanced« with »
press »OK« to confirm.
6 Select the required line/function with »
or » « and press »OK« to confirm.
Λ
Select the value/option with »
press »OK« to confirm.
Press »BACK
<
tings« menu.
7 Press »EXIT« to end the setting.
22­ ENGLISH
­------------------------------------------------------------------------------------------------------------------
Sound Settings >
16:9
Vivid
User
Change Area Back
« or » « and press
V Λ
< >
« or » « and press
« and
V
< >
« or »
« to return to »Picture Set-
Enhanced­picture­settings­
The "enhanced picture settings" are in principal
digital image improvements which, however,
should be only used when necessary when pic-
ture quality and transmission is excellent. They
may well improve the display with poor material,
but may adversely affect the display where trans-
mission and picture quality are excellent.
»Backligh« – Manual setting for back light-
7
ing (only active if dynamic back lighting is
switched to "OFF"). This setting also directly
OK
impacts power consumption.
»Dynamic Backlight« – Here the device opti-
mally adjusts the back lighting for the picture
content by regulating the back lighting de-
pending on the average picture brightness.
If a picture has predominately dark areas,
Exit
then the black level displayed is improved by
downward adjustment of the back lighting (in
this case the display of the dark areas is im-
proved), and with predominantly bright pic-
ture material the back lighting is maximised
in order to display these areas more brightly.
»Vibrant Colour« – Increases the colour con-
7
trast and the contrast adjustment. This setting
is mostly too strong for use with normal pic-
tures and should only be used where neces-
sary (low or off) otherwise nuances in the
image can be suppressed.
»Gamma« – This setting establishes which
7
«
V
brightness value should be displayed for
which digital transmission value. Most re-
« and
cordings are transmitted with a gamma
value of 2.2 (all Windows PCs and newer
PCs with a MAC operating system work with
this, older MAC systems and transmissions
without colour profile mostly operate with a
gamma value of 1.8).
»Dynamic Contrast« – The function dynami-
7
cally and optimally adjusts the contrast for
the respective picture content by analysing
images and then altering this depending in
a change in contrast. This increase the con-
tract, however may also reduce the visible
brightness levels in the picture.