Advertisement
Specifications
MODEL NUMBER
Enclosure
Speaker
Handling Power Capacity
Continuous Pink Noise
Continuous Program
Impedance
Sensitivity
Frequency Response
Crossover Frequencies
Middle Frequency
Level Control
Finish (Enclosure)
Dimensions
Weight
* Specifications are subject to change without notice.
Input Panel
FULL RANGE INPUT
Connects to the output of power amplifier. This is
the input jack when used as a full range speaker.
BI-AMP INPUT (HIGH)
Connects to the amplifier for high frequency when
driving the speaker system with bi-amplification.
BI-AMP INPUT (LOW)
Connects to the amplifier for low frequency when
driving the speaker system with bi-amplification.
MID-FREQUENCY ATTENUATOR
Adjusts the sound level of the mid-frequency when
driving the speaker system as a full range speaker
system. Make the level setting according to the
environmental
conditions,
although
almost flat
frequency response is obtainable so far as the
attenuator remains within the "NORMAL" range.
Frequency Response (1W/1m: Pink Noise)
38-SDM
— : Attenuator at NORMAL position.
38-SDM
Vented (bass reflex) type
15" (38cm) woofer Radial horn and
compression driver Two 3" tweeters
120 watts of band-limited pink noise [50Hz ~ 20kHz]
360 watts
8 ohms
102dB (1W/1m)
50Hz ~20kHz
1kHz, 10kHz
0- -10dB (with an "OFF" position)
Polyester pa
int, Color: Gray
520(H)x500(W)x660(D) mm
20.5(H)x19.7(W)x26.0(D) inches
24kg (52.9 Ibs)
30-SDM
--- : Attenuator at MAX. position.
30-SDM
12" (30cm) woofer Radial horn and
compression driver 3" tweeter
100dB (1W/1m)
60Hz~ 20kHz
475(H)x430(W)x600(D) mm
18,7(H)x16.9(W)x23.6(D) inches
20kg (44.1 Ibs)
FULL RANGE OUTPUT
Make bridge connection of this output to the full
range input of another speaker system when driving
two speaker systems with one power amplifier.
BI-AMP OUTPUT (HIGH)
For bridge connection in high frequency to another
speaker.
BI-AMP OUTPUT (LOW)
For bridge connection in low frequency to another
speaker.
CAUTION:
DO NOT USE THE BI-AMP JACKS UNLESS THE
SPEAKER
SYSTEM
IS
DRIVEN
MULTI-AMPLIFIERED
SYSTEM.
THE FULL RANGE OUTPUT TO THE BI-AMP
INPUT JACK MAY DAMAGE THE SPEAKER.
UNDER
CONNECTING
133-01-173-30
Advertisement
