How To Enter Into The Factory Model - Haier LE55K5000TFNa Service Manual

8.1 How to enter into the factory model

8.1 How to enter into the factory model 8.1 How to enter into the factory model
1. You can press "source-2-5-8-0" to go into factory setting. Presse the key "exit"
to shut the factory setting.
content:
1.SW INFORMATION :Choose SW INFORMATION, press OK to enter SW INFORMATION page
2. Init EEPROM : Choose Init EEPROM, press OK to restore the factory setting
3. Burn Mode : factory burning mode, press OK to start and press
4. Factory Rest :press OK to restore the factory setting
5. Power ON Mode
On :the Unit will automatically turn on when the AC switch is on.
Off: the unit will stand by when the AC switch is on
Last: when the AC switch is on, the unit will be the same as the last time.
6. Other
6.1 .PICTURE MODE: change the parameters of contrast, brightness, color, sharpness,
6.2.W/B ADJUST: change the value of R/G/B of color temperature mode( Normal, Cool, Warm, User).
6.3.Over Scan : Change Repetition rate proportional mode for every signal
6.4. Special Func : adjust the backlight value
6.5.MAC ADDR Update(USB): MAC ADDR upgrading Lock
6.6.Sound Mode: change the value of Treble/ Bass of Audio Mode
6.7.Network Test: Wired Network test
6.8.WIFI Test: Wi-Fi Network test
6.9.CI Plus key Existed: CI key upgrading Lock
6.10.HDCP key Existed: HDCP key upgrading Lock
6.11.Blue Screen : Blue Screen switch
6.12.LCN ON/OFF: LCN switch of logic channel No.
and tint for every signal.
- 51 -
Service Manual
Model No.: