Table Of Contents; Software; Documentation - National Instruments NI-9228 Calibration Procedure

8 ai, +-60 v, 24 bit, 1 ks/s/ch simultaneous

Table of Contents

CALIBRATION PROCEDURE

NI 9228

8 AI, ±60 V, 24 Bit, 1 kS/s/ch Simultaneous

This document contains the verification and adjustment procedures for NI 9228. For more

information about calibration solutions, visit ni.com/calibration.

Contents

Software.................................................................................................................................... 1

Documentation.......................................................................................................................... 1

Test Equipment..........................................................................................................................2

Test Conditions..........................................................................................................................3

Initial Setup............................................................................................................................... 3

Verification................................................................................................................................3

Accuracy Verification....................................................................................................... 3

Adjustment................................................................................................................................ 5

Accuracy Adjustment........................................................................................................5

EEPROM Update...................................................................................................................... 6

Reverification............................................................................................................................6

Accuracy under Calibration Conditions....................................................................................6

Worldwide Support and Services.............................................................................................. 6

Calibrating the NI 9228 requires the installation of NI-DAQmx 18.1 or later on the calibration

system.

You can download NI-DAQmx from ni.com/downloads. NI-DAQmx supports LabVIEW,

™

LabWindows

/CVI

install support for the application software that you intend to use.

Consult the following documents for information about the NI 9228, NI-DAQmx, and your

application software. All documents are available on

software.

™

, ANSI C, and .NET. When you install NI-DAQmx, you only need to

ni.com

and help files install with the

Table of Contents