Table of Contents
Advertisement
1
Stop altitude measurement or compass function
and check the power reserve indication.
Charge the watch if the power reserve is lower than "2".
2
Pull the crown out to position .
The 1 000 m hand, 100 m hand (compass hand) and 2.5
m hand move to their current reference positions. Do
not execute any operation until all the hands stop.
3
Press and hold button
same time for 4 seconds or more.
As you release the buttons, the hands move slightly to
indicate that reset completed.
Troubleshooting
and button
at the
57
Advertisement
Table of Contents
