Troubleshooting
Symptom
Water depth measurement does not start
The power reserve indication
hand does not point to "READY"
even after taking the watch into
water.
The water depth hand does not
move from 0 m.
46
Remedies
Push the crown in to position
Be sure the watch is fully charged.
Ensure no foreign object, debris or dirt is on
the water sensor.
Check whether any foreign object, debris or
dirt is on the water pressure sensor.
Water depth indication is 0 m if the depth is
shallower than 1 m.
Page
21
.
14
−
−
23