Xerox DocuPrint 4050 IPS Troubleshooting Manual page 19

XEROX DOCUPRINT 4050/4090 IPS TROUBLESHOOTING GUIDE
2. Lightly moisten a lint-free towel with film remover and
thoroughly wipe the outside surface of the feed belt in the same
direction as the ribs on the belt. (Wiping from side to side might
pull the belt off its track.) Allow a few seconds for the film
remover to evaporate.
3. Latch the paper feeder assembly by pressing down on the
bright green dot. Slide the paper tray completely back into the
printer.
Operate the system as usual. If you continue to experience misfeeds,
place a service call.
CLEARING PAPER MISFEEDS AND JAMS
2-5