Advertisement
1. Application Range
This specification sheet is applied to all of the LCD TV with
LD85F chassis.
2. Designation
1) The adjustment is according to the order which is
designated and which must be followed, according to the
plan which can be changed only on agreeing.
2) Power Adjustment: Free Voltage
3) Magnetic Field Condition: Nil.
4) Input signal Unit: Product Specification Standard
5) Reserve after operation: Above 5 Minutes (Heat Run)
Temperature : at 25±5ºC
Relative humidity : 65±10%
Input voltage : 220V, 60Hz
6) Adjustment equipments: Color Analyzer (CA-210 or CA-
110), Pattern Generator (MSPG-925 or MSPG-1025), DDC
Adjustment Jig equipment, Service remote control.
7) Don't push the "IN STOP KEY" after completing the
function inspection.
3. Main PCB check process
* APC - After Manual-Insult, executing APC
* Download
1) Execute ISP program "Mstar ISP Utility" and then click
"Config" tab.
2) Set as below, and then click "Auto Detect" and check "OK"
message. If display "Error", Check connect computer, jig
and set.
3) Click "Connect" tab. If display "Can't", Check connect
computer, jig, and set.
(2)
OK
4) Click "Read" tab, and then load download file(XXXX.bin) by
clicking "Read".
(4)
filexxx.bin
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
ADJUSTMENT INSTRUCTION
(1)
(3)
Please Check Speed :
To us speed between from 200 KHz
to 400 KHz
5) Click "Auto" tab and set as below
6) Click "Run".
7) After downloading, check "OK" message.
(5)
filexxx.bin
* USB DOWNLOAD
1) Put the USB Stick to the USB socket.
2) Automatically detecting update file in USB Stick
- If your downloaded program version in USB Stick is Low,
it didn't work. But your downloaded version is High, USB
data is automatically detecting.
- 9 -
(7) ........ OK
(6)
U SB Por t
LGE Internal Use Only
Advertisement
