Table of Contents
Advertisement
BEEP
Acknowledgement tone for
all functions which require a
button to be pressed for
more than 1 second.
The volume can be adjusted
from between 0 to 9.
(0 = off)
TA VOL
To adjust the traffic an-
nouncement and beep tone
volume from between 0 to
63.
The message will then come
through at this volume, if the
volume adjusted for the pro-
gram is lower.
If the program volume is
higher than the TA VOL lev-
el, the traffic report will be
played slightly louder.
38
LOUDNESS When listening at a low lev-
el, the Loudness function
creates a more natural
sound by boosting the low
frequency range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
STEREO/MONO
You can select between
stereo or mono sound.
LO/DX
To adjust the seek tuning
sensitivity for local or distant
stations.
LO - local stations
LO 1 - high sensitivity
LO 3 - normal sensitivity
DX - distant stations
DX 1 - high sensitivity
DX 3 - normal sensitivity
AUX
Please note that this item
ON/OFF
will not appear if you have
connected a CD changer.
Default setting: AUX OFF.
Adjust to AUX ON if you
have connected an external
piece of equipment to the
AUX socket.
To quit the DSC programming mode
and store the adjustment:
•
Press DSC.
The DSC programming mode will be auto-
matically quit 8 seconds after having made
the last adjustment.
Overview of DSC factory set-
tings
MIX
OFF
REG
OFF
RM
OFF
READ KC
-
LEARN KC
-
LED
ON
BEEP
4
TA VOL
35
LOUDNESS
3
STEREO/MONO
STEREO
DX
1
Advertisement
Table of Contents
