Cleaning The Drip Tray And Coffee Dregs Container; Cleaning The Milk Container; Service Programmes - Siemens IQ700 CT7 Series Information For Use

Rinse the water tank with fresh,
3.
clean water.
If the appliance has not been used
4.
for a long time, e.g. after a holiday,
clean the entire appliance, includ-
ing moving parts such as the brew-
ing unit or water tank.
Note: The appliance will rinse itself
automatically if you switch it on when
it is cold or switch it off after it has
dispensed coffee. The system is
therefore self-cleaning.
15.4 Cleaning the drip tray
and coffee dregs con-
tainer
Clean and empty the drip tray and
coffee dregs container every day to
prevent deposits. Follow the illus-
trated instructions at the beginning of
this manual.
→ Fig. 26 - 28
15.5 Cleaning the milk con-
tainer
Clean the milk container regularly for
hygiene reasons. You can clean the
milk container in the dishwasher. Fol-
low the illustrated instructions at the
beginning of this manual.
→ Fig. 19 - 22
15.6 Service programmes
Use the service programmes if you
insert or remove a water filter or in
order to clean your appliance thor-
Overview of service programmes
You can find an overview of the service programmes here.
Note: The start image shows the remaining number of beverages that can be
dispensed until running the programme and the duration.
Cleaning and servicing en
oughly. Your appliance will tell you
when you need to perform a service
programme, e.g. cleaning.
ATTENTION!
Improper cleaning and descaling or a
delay in doing so may damage the
appliance.
▶
Immediately perform the descaling
process in accordance with the in-
structions.
▶
Only put cleaning tablets in the
brew chamber of the brewing unit.
▶
Do not put descaling tablets or
other products in the brew cham-
ber of the brewing unit.
Notes
The display indicates the progress
¡
of the descaling or cleaning pro-
cess.
If your appliance has been locked,
¡
you can only operate it again once
the descaling process has been
carried out.
Tip: In addition to the automatic rins-
ing process, regularly also remove
and clean the brewing unit.
Using the service programmes
Press "Care & maintenance".
1.
Press the symbol for the required
2.
programme.
The display will guide you through
a
the programme.
59