Acer V173 Service Manual page 25

OSD Message
a. Outline
b. The Description For OSD Message
Item
Auto Config When Analog signal input, if User Press Hot-Key "Auto", will show this message, and the
Please Wait monitor do the auto config function.
Input Not When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor
Supported support range, will show this message. This message will be flying.
Cable Not Analog-Only Model: When the video cable is not connected, will show this message.
Connected This message will be flying.
Analog-Only Model: When the video cable is connected, but there is no active signal
No Signal
input, will show this message, then enter power saving.
Description
25