Refrigerator Maintenance; Gas Flame Appearance; Remove And Clean The Burner Orifice - Norcold 2117 Owner's Manual

Refrigerator Maintenance

Gas flame appearance:

While in LP GAS operation, examine the appearance of the gas flame:
- Push the TEMP SET button until the number "9" appears in the center display.
- Open the lower intake vent.
!
CauTion:
The burner box cover can be hot. Wear gloves to avoid burns.
- Look at the gas flame [75] (See Art00955).
- The flame should be:
- a darker blue color on the inside of the flame and a lighter blue color on the outside
of the flame.
- a constant shape without flickering.
- Contact your dealer or Norcold authorized service center if the flame is:
- yellow
- flickering or changing shape.
- Make sure the flame does not touch the inside of the flue tube [76].
- If the flame touches the inside of the flue tube, contact your dealer or Norcold authorized service center.
- Close the burner box door.

Remove and clean the burner orifice:

Your dealer or Norcold authorized service center must do this procedure.
Remove and clean the burner orifice (See Art00956):
- Close the valve at the propane gas tank(s).
- Push the ON / OFF button to shut down the refrigerator.
- Open the lower intake vent.
!
CauTion:
The burner box cover can be hot. Wear gloves to avoid burns.
- Remove the burner box cover by removing the screw(s).
!
WARNING:
To avoid possible propane gas leaks, always use two wrenches to loosen and tighten the gas supply line con-
nections.
- Remove the flare nut from the orifice assembly [77] (See Art00956).
- Remove the orifice assembly from the burner [78].
Owner's Manual 18
76
Art00955
80 78
77
79
Art 00956
75
167