Mitsubishi Electric PLA-A12EA8 Service Manual page 53

4. Use the F1 or F2 button to move the cursor to select the mode number, and
change the setting number with the F3 or F4 button.
5. When the settings are completed, press the [SELECT/HOLD] button to send the
setting data from the remote controller to the indoor units.
When the transmission is successfully completed, the screen will return to the
Function setting screen.
Note: • Make the above settings only on Mr. Slim units as necessary.
• The above function settings are not available for the CITY MULTI units.
• Table 1 summarizes the setting options for each mode number. Refer to
the indoor unit Installation Manual for the detailed information about ini-
tial settings, mode numbers, and setting numbers for the indoor units.
• Be sure to write down the settings for all functions if any of the initial
settings has been changed after the completion of installation work.
TCH120A
53
Function setting
Ref. address Grp.
Mode 1
Mode 2
Mode 3
Mode 4
Request: SELECT
Cursor Cursor
F1 F2 F3 F4
ON
SELECT
MENU RETURN
OFF
HOLD
Function setting
Ref. address
Sending data
F1 F2 F3 F4
ON
SELECT
MENU
RETURN
OFF
HOLD