Sony SRS-XB402G Help Manual page 52

Help Guide
Wireless Speaker
SRS-XB402G
No sound is output or the playback sound distorts/interrupts
Check the volume of your speaker and the connected BLUETOOTH device.
Make sure that playback is in progress on the connected BLUETOOTH device.
If you are connecting a computer to the speaker, make sure the audio output setting of the computer is set for a
BLUETOOTH device.
Make sure that a BLUETOOTH connection is established between your speaker and the BLUETOOTH device.
Pair your speaker with the BLUETOOTH device (device registration) once again.
Make sure that the equalizer function of the connected BLUETOOTH device is not active. For detailed instructions,
refer to the operating instructions supplied with the BLUETOOTH device.
Move your speaker away from a microwave oven or a Wi-Fi device.
Bring the BLUETOOTH device closer to your speaker. If there is an object between the speaker and the
BLUETOOTH device, move the object out of the way.
If the CHARGE indicator flashes slowly, turn off the speaker and charge the built-in battery sufficiently.
A device with a built-in radio or tuner cannot be connected to the speaker via a BLUETOOTH connection since noise
may occur in broadcasts.
Locate the speaker farther away from a TV, radio or tuner, etc. since noise may occur in broadcasts.
5-005-566-11(3) Copyright 2019 Sony Corporation
52