Table of Contents
Advertisement
If you cannot click [Connect] for the speaker, select [Disable] for the [Default Device] that currently has a
checkmark (green).
Confirm that the BLUETOOTH connection is complete.
6
Hint
The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the computer.
However, operation with all computers is not guaranteed. Operation with a home-built computer is also not covered by the
warranty.
Note
The
/
PAIRING button is disabled before the Google Assistant setup is complete.
If the speaker goes out of BLUETOOTH pairing mode before you finish the procedure and the name of the speaker does not
appear on the BLUETOOTH device screen, repeat the procedure from step
Once the speaker is paired with the computer, there is no need to pair them again, except in the following cases:
Pairing information is deleted due to repair work, etc.
The pairing information of the speaker is deleted from the computer.
The speaker is initialized.
All pairing information will be deleted.
The passkey of the speaker is "0000." If a passkey besides "0000" is set on the computer, pairing with the speaker fails.
.
25
Advertisement
Table of Contents
