Programs Table; Programs Description - Indesit DIE 2B19 A Daily Reference Manual

Table of Contents

Available languages

PROGRAMS TABLE

Program

1. Eco

2. Intensive

3. Mixed

4. Fast&Clean 28'

5. Push&GO

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories:

For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Values given for programmes other than the eco programme are indicative only. The actual time may vary depending on many factors such as tem-

perature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected

options and sensor calibration. The sensor calibration can increase program duration up to 20 min.

PROGRAMS DESCRIPTION

Instructions on wash cycle selection.

ECO

Eco program is suitable to clean normally soiled tableware, that for this

use, it is the most efficient program in terms of its combined energy and

water consumption, and that it is used to assess compliance with the

EU Ecodesign legislation.

2 INTENSIVE

Program recommended for heavily soiled crockery, especially suitable

for pans and saucepans (not to be used for delicate items).

3 MIXED

Mixed soil. For normally soiled dishes with dried food residues.

PUSH&GO

Push&GO (P) button is an easily distinguishable button that allows you direct access to the Push&GO program, a wash and dry cycle

that ensures great cleaning performance in a short time. You don't have to worry which program to choose, Push&GO cycle will do the

work for you.

To select Push&GO program, switch on appliance, press only P button for 3 seconds (corresponding indicator lights up) and close the

door within 4 seconds.

Duration

of wash

program

(h:min)

50°