Multi-Function Display - Yamaha Grizzly 450 2010 Owner's Manual

EBU18037

Multi-function display

4
1. Speedometer
2. "H" button
3. "M" button
4. Clock/Hour meter
5. Odometer/Tripmeter A/Tripmeter B
6. "TRIP/ODO" button
7. Clock/Hour " /
The multi-function display is equipped with the fol-
lowing:
G
a speedometer
G
an odometer
G
two tripmeters (which show the distance trav-
eled since they were last set to zero)
G
a clock
" button
G
an hour meter (which shows the total time the
key has been turned to "ON")
Odometer and tripmeter modes
Pushing the "TRIP/ODO" button switches the dis-
play between the odometer mode "ODO" and the
tripmeter modes "TRIP A" and "TRIP B" in the fol-
lowing order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
"TRIP/ODO" button,
"TRIP/ODO" button for at least three seconds. The
tripmeters can be used to estimate the distance
that can be traveled with a full tank of fuel. This in-
formation will enable you to plan future fuel stops.
TIP
Pushing and holding in the "TRIP/ODO" button,
and turning the key to "ON" while the button is
pushed, switches the display between "mph" and
"km/h".
Clock mode
Pushing the " / " button switches the display
between the clock mode "CLOCK" and the hour
meter mode "HOUR" in the following order:
CLOCK → HOUR → CLOCK
4-5
and then push the