ASROCK Z690M PG RIPTIDE/D5 User Manual page 71

Z690M PG Riptide/D5
BCLK Frequency
Configure the BCLK Frequency.
Primary Timing
CAS# Latency (tCL)
The time between sending a column address to the memory and the beginning of the data
in response.
RAS# to CAS# Delay (tRCD)
The number of clock cycles required between the opening of a row of memory and
accessing columns within it.
Row Precharge (tRP)
The number of clock cycles required between the issuing of the precharge command and
opening the next row.
RAS# Active Time (tRAS)
The number of clock cycles required between a bank active command and issuing the
precharge command.
Command Rate (CR)
The delay between when a memory chip is selected and when the first active command can
be issued.
Secondary Timing
Write Recovery Time (tWR)
The amount of delay that must elapse after the completion of a valid write operation,
before an active bank can be precharged.
Refresh Cycle Time 2 (tRFC2)
The number of clocks from a Refresh command until the first Activate command to
the same rank.
Refresh Cycle Time per Bank (tRFCpb)
The number of clocks that a per back Refresh command takes to complete.
RAS to RAS Delay (tRRD_L)
The number of clocks between two rows activated in different banks of the same
rank.
63