Dmz Settings; Upnp Settings - Tenda W306R User Manual

DMZ Settings

The DMZ function is to allow one computer in
LAN to be exposed to the Internet for a
special-purpose service as Internet gaming or
videoconferencing.
DMZ Host IP Address: The IP address of the
computer you want to expose.
Enable: Click the checkbox to enable the DMZ
host.
IMPORTANT: When enabled the DMZ host,
the firewall settings of the DMZ
host will not function.

UPnP Settings

It supports latest Universal Plug and Play. This
function goes into effect on Windows XP or
Windows ME or this function would go into effect
if you have installed software that supports
UPnP. With the UPnP function, host in LAN can
request the router to process some special port
switching so as to enable host outside to visit the
resources in the internal host.
Enable UPnP: Click the checkbox to enable the
UPnP.
Wireless-N Broadband Router
47