What Is Common Interface; Inserting The Ca Module; Access Control For Ca Module And Smart Cards - Grundig 24 VLE 4820 User Manual

OPERATION­WITH­COMMON­INTERFACE
What­is­Common­Interface?
Common Interface (CI) is an interface for DVB
7
receivers.
Scrambled channels can only be viewed with
7
a CA module suitable for the encoding system
and the corresponding smart card.
The television set is equipped with a Common
7
Interface slot into which CA modules from
various providers can be inserted.
You can insert the provider's smart card
7
into the CA module in order to enable the
scramble channels you want to see.
Inserting­the­CA­module
Note:
Switch off the appliance before inserting
7
the CA module in the »CI« slot.
1­ Insert the smart card into the CA module.
2­ Insert the CA module with the smart card
into the »CI« slot on the television.
Note:
When you insert a CA module into the
7
CI slot on the television for the first time,
wait a few moments until the television has
registered the CA module.
Access­control­for­CA­module­
and­smart­cards
1­
Press »MENU« to open the menu.
< >
2­
Press » « or » « to select the »Channel«
menu and press »OK« to confirm.
– » CHANNEL« menu is now enabled.
3­ Press » « or »
V Λ
Information« and confirm with »OK«.
Notes:
This menu give operating instructions and –
7
after you enter your PIN code – access to
channels of the PAY-TV provider.
Other settings are described in the manuals
7
for your CA module and smart card.
CAM is not supported in some countries
7
and regions. Please consult your authorised
dealer.
4­
Press »EXIT« to finish the settings.
­ - --------------------
« to select »CI
ENGLISH
43­