Timer - Mitsubishi Electric CITY MULTI PLFY-EP NEMU-E1 Series Operation Manual

4. Operation (For Simple MA remote controller)
4.5. Temperature range restriction
The preset temperature range for each operation mode can be restricted.
The air conditioning unit stops.
(1) ON/OFF
(2) FAN
A. No temperature
range restriction
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
(3)
Press the button to stop the air conditioning unit.
ON/OFF
Press and hold the
FAN
Press the button to select from A through D.
MODE
* When the AUTO (single set point) mode is not available on the indoor unit, or when the AUTO mode is set to OFF in the Mode skip setting, D will
not be displayed.
A. No temperature range restriction:
The temperature range restriction will not be executed for all modes.
B. Temperature range restriction for COOL/DRYING mode:
The preset temperature range for COOL/DRYING, AUTO (dual set point), and SETBACK mode can be changed.
C. Temperature range restriction for HEAT mode:
The preset temperature range for HEAT, AUTO (dual set point), and SETBACK mode can be changed.
D. Temperature range restriction for AUTO (single set point) mode:
The preset temperature range for AUTO (single set point) mode can be changed.
Press the button to switch between the upper limit (Hi) and lower limit (Lo) settings.
FAN

5. Timer

■ Timer functions are different by each remote controller.
■ For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
en
15
(6) FAN
(Press the button for three
seconds or longer.)
B. Temperature range restriction for COOL/DRYING mode
Upper limit
Set to
Room
(3) MODE
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
(3)
MODE
C. Temperature range restriction for HEAT mode
Upper limit
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
(3) MODE
D. Temperature range restriction for AUTO (single set point) mode
Upper limit
Set to
Room
MODE
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
button for three seconds or longer to bring up the temperature range restriction setting display. (A or B appears.)
(Press the button for three seconds or longer.)
Lower limit
(5) TEMP. /
Set to
Room
(4) FAN
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Lower limit
(5) TEMP.
/
Set to
Room
(4) FAN
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Lower limit
(5) TEMP.
/
Set to
Room
(4) FAN
AUTO COOLHEATFAN
DRYING VENTI. SETBACK