Nikon N65 Instruction Manual page 92

,
- - - - - - - - - - - - - -
-
- - - - -
- - - - - - - - - -
• Notes on using optional Speedlights
• See your Speedlight manual for details. If the camera groups are defined in the
manual of the Speed light with TTL Auto Flash, see the section for camera
group
II.
• Flash sync speed is 1/90 sec. or slower when using an optional Speedlight.
• Available film speeds for TTL Auto Flash are ISO 25 to ISO 800.
• When Red-Eye Reduction or Red-Eye Reduction with Slow Sync is set on a
camera attached with the SB-28/28DX, 27 or 26, the Red-Eye Reduction lamp of
the Speedlight lights up. With other Speedlights, the Red-Eye Reduction lamp of
the camera body lights up.
• When optional Speedlight with AF-Assist Illuminator, SB-28/28DX, 27, 26, 25 or
24, is attached, the AF-Assist Illuminator of the optional Speedlight emits light
when the focus mode is set to AF, an AF Nikkor lens is attached, the subject is
dark and center focus area is selected or Dynamic AF Mode with Closest-Subject
Priority is activated. With other optional Speed lights, the AF-Assist Illuminator on
the camera emits light.
• Set the exposure mode to Aperture-Priority Auto or Manual to take flash pictures
with non-TTL flash mode.
• With the SB-26, 25 or 24, even if Front-Curtain Sync is set on the camera body,
the Speedlight performs Rear-Curtain Sync when Rear-Curtain Sync is set on the
Speed light in P, 5 , A or M exposure mode (camera setting is overridden). In
8
or
Vari-Program (except
!!i),
Speedlight performs Front-Curtain Sync even if Rear-
Curtain Sync is set on Speed light (Speed light setting is overridden).
• With the SB-26, 25 or 24, when Slow Sync is set on the camera body in
I!:! ,
Rear-
Curtain Sync is performed if Rear-Curtain Sync is set on the Speedlight.
• With the SB-26, 25 or 24, when Red-Eye Reduction or Red-Eye Reduction with
Slow Sync is set on the camera body, Speedlight performs Red-Eye Reduction or
Red-Eye Reduction with Slow Sync even if Rear-Curtain Sync is set on the
Speedlight.
•
FE E
in the LCD panel and
FE
E
and
~
in the viewfinder blink and the shutter
cannot be released when the exposure mode is set to P,
~ or Vari-Program and
the attached optional Speedlight is not set to TTL Auto Flash. Set the Speedlight
flash mode to TTL, or set the camera's exposure mode to 5 , A or M.
92