Table of Contents
Advertisement
Fig. 2.15
Flat shelf
Front
Drop shelf
Front
Fig. 2.16
Fig. 2.17
Fig. 2.18
Accessories
Oven Shelves
Shelf guard
The cooker is supplied with the following:
4 standard shelves and 1 drop shelf (Fig. 2.15)
2 sets of side supports (Fig. 2.16)
With the exception of the top position in the left-hand
multifunction oven, which will only accept the drop shelf, any
Shelf guard
shelf can be fitted in any of the positions.
The oven shelves are retained when pulled forward but can
be easily removed and refitted.
To remove and refit the shelf
The shelf has a small kink on either side (Fig. 2.17). To remove
the shelf, line these up with the stops in the shelf support
(Fig. 2.18). Lift the shelf upwards so that it will pass over the
shelf stop and then pull it forwards (Fig. 2.19).
Refit in the reverse order, making sure to push the shelf fully
back.
Fig. 2.19
12
Advertisement
Table of Contents
