Citizen AT9010-52E Instruction Manual page 82

Table of Contents

Advertisement

• Even if your watch has a high level of water resistance, please be careful of the following.
• If your watch is immersed in sea water, rinse thoroughly with fresh water and wipe with a dry cloth.
• Do not pour water from a tap directly onto your watch.
• Take off your watch before taking a bath.
• If seawater enters the watch, place the watch in a box or plastic bag and immediately take it in for
repair. Otherwise, pressure inside the watch will increase, and parts (crystal, crown, push button,
etc.) may come off.
CAUTION
<Band>
• Leather, genuine skin and rubber (urethane) bands will deteriorate over time due to perspiration,
body oils and dirt. Be sure to replace the band periodically.
• The durability of a leather band may be affected when wet (fading, peeling of adhesive), owing
to the properties of the material. Moreover, wet leather may cause a rash.
• It is recommended to take off the watch if it gets wet, even if the watch itself is water-resistant.
• Do Not wear the band too tightly. Try to leave enough space between the band and your skin to
allow adequate ventilation.
• The rubber (urethane) band may be stained by dyes or soil present in or on clothing or other accessories.
Since these stains may not be removable, caution is required when wearing your watch with items that
tend to easily transfer color (articles of clothing, purses, etc.). In addition, the band may be deteriorated
by solvents or moisture in the air. Replace with a new one when it has lost elasticity or become cracked.
When Wearing Your Watch
Precautionary items and usage limitations
81

Advertisement

Table of Contents
loading

Table of Contents