Checking The Time Signal Reception - Citizen AT9010-52E Instruction Manual

Checking the time signal reception

Check the result of the last signal reception.
1. Ensure that the crown is in position 0 .
2. Press and release the lower right button Ⓐ .
0 1 2
The second hand moves and indicates the reception
result.
• For details on the reception result, see the next page.
3. Press and release the lower right button Ⓐ to
Ⓐ
finish the check procedure.
• Normal operation will resume if the button is not
pressed for approx. 10 seconds.
57