Table of Contents
Advertisement
EN 12
4.
TPM16.2HE LA
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3
Assembly/Panel Removal (for 7011T series)
Instructions below apply to the 49HFL7011T/12, but will be
similar for other 49"/55"/65" 7011T series models.
2016-May-27
Mechanical Instructions
4.3.1
1
1
Figure 4-4 Stand removal[1]
back to
div.table
Stand
Refer to
Figure 4-4
and
Figure 4-5
1. Remove the screws [1] that secure the black plastic and,
gently remove the black plastic casing that covers the
stand bracket, refer to
Figure
2. Remove the Allen screws [2] that secure the stand bracket
and, pull out the stand downwards from the set, refer to
Figure
4-5.
for details.
4-4.
20130_103.eps
Advertisement
Table of Contents
