Adjustments; How To Enter The Service Mode - Sony KDL-32S4000 Service Manual

3-1. How to enter the Service Mode

Service adjustments to this model can be performed using the
supplied remote commander RM-ED009.
1. Turn on the power to the TV set and enter into the stand-by
mode.
2. Press the following sequence of buttons on the remote
commander.
i+ 5
(ON SCREEN (DIGIT 5)
DISPLAY)
'TT—' will appear in the upper right corner of the screen.
Other status information will also be displayed (See 3-3 page
13).
3. Press 'MENU' on the remote commander to obtain the
following menu on the screen.
BACKLIGHT
HDMI
SOUND
IF ADJUST
PANEL TEMP
GAMMA CORR
ERROR MENU
SE2AG v3.22 Jul08
FACTORY DATA: 11111111
SERIAL NUMBER: 4294967295
WORKING TIME: 19:16
4. Move to the corresponding adjustment item using the
up or down arrow buttons on the Remote Commander.
5. Press the right arrow button to enter into the required menu
item.
6. Press the 'Menu' button on the Remote Commander to quit
the Service Mode when all adjustments have been completed.
Note :
• After carrying out the service adjustments, to prevent the
customer accessing the 'Service Menu' switch the TV set
OFF and then ON again.
SECTION 3 ADJUSTMENTS
+
+
I/
TV
(VOLUME +) (TV)
BACKLIGHT
BACKLIGHT
U BACKLIGHT
BL SETUDEN
BL BOTTOM
ECO MODE
APL MAX
DIMMER MIN
AFC FACTOR
OSD CONTR MIN
S BLACK OUT
S BLACK ENTER
S BLACK EXIT
S BLACK STEP
DIMMER
APL MIN
HDMI
VAI2
VAI3
Vper MSB
Vper LSB
Hper MSB
HS Width MSB
STM LSB
Ri (MSB)
Ri (LSB)
Aksv_0
Aksv_1
Aksv_2
Aksv_3
Aksv_4
An_0
An_1
An_2
An_3
An_4
An_5
An_6
An_7
Pj
Ainfo
Flags
- 10 -
(0, 255) 235
(0, 10) 10
(0, 255) 38
(0, 255) 92
(0, 1) 1
(0, 255)
140
(-128,+127) -32
(0, 255) 0
(0, 255) 40
(0, 255) 39
(0, 255)
20
(0, 255) 50
(0, 255) 1
(0, 255) 186
(0, 255) 103
(0, 255) 0
(0, 255) 0
(0, 255) 3
(0, 255) 31
(0, 255) 0
(0, 255) 0
(0, 255) 176
(0, 255) 218
(0, 255) 101
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 0
(0, 255) 202
(0, 255) 0
(0, 255) 6