Nikon COOLPIX P310 Reference Manual page 233

Problem
• Confirm the conditions that are required for editing pictures or
Pictures and
movies cannot be
• Pictures and movies taken with cameras other than COOLPIX
edited.
• Video mode or HDMI is not correctly set in the TV settings
Pictures are not • Cables are connected to both the HDMI mini connector and
displayed on
television. • Memory card contains no pictures. Replace memory card.
• Camera is off.
• Battery is exhausted.
Nikon Transfer 2 • USB cable is not correctly connected.
does not start • Camera is not recognized by the computer.
when camera is • Confirm that the operating system used is compatible with
connected to a
computer. • Computer is not set to launch Nikon Transfer 2 automatically.
The PictBridge
With some PictBridge-compatible printers, the PictBridge startup
startup screen is
screen may not be displayed and it may be impossible to print
not displayed
images when Auto is selected for the Charge by computer
when the camera
option. Set the Charge by computer option to Off and
is connected to a
reconnect the camera to the printer.
printer.
Pictures to be • Memory card contains no pictures. Replace memory card.
printed are not • Remove memory card to print pictures from internal memory.
displayed. • Pictures taken by 3D photography cannot be printed.
Paper size cannot be selected from the camera in the following
situations, even for PictBridge compatible printers. Use the
Cannot select
printer to select paper size.
paper size with
• The paper size selected using the camera is not compatible
camera.
• A printer that automatically sets the paper size is being used.
Cause/Solution
movies.
P310 cannot be edited.
setup menu.
USB/audio video connector.
Remove memory card to play back pictures from internal
memory.
the camera.
For more information on Nikon Transfer 2, refer to help
information contained in ViewNX 2.
with the printer.
Troubleshooting
A
E17,
E32
–
100,
E82
86
18
21
20
86
–
87
90
100,
E84
18
19
E8
E28,
E29
–
F13