Connecting To Wi-Fi - Cambridge Audio C10973 Manual

14

Connecting to Wi-Fi

Last updated: September 2, 2022 12:51. Revision #8092
Important Note: It is vitally important that your EDGE NQ remains connected to a Wi-Fi network as often as possible. This will ensure that the unit
is regularly updated to meet essential security protocols, third party compatibility and the latest software requirements.
Failure to maintain your device with regular firmware updates as provided by Cambridge Audio will void the product warranty and is likely to cause
major issues to the unit in time. Please ensure that your unit is updated to the most current firmware version. Information on the latest firmware
version for the Edge NQ can be found here.
Note: The Edge NQ is not compatible with captive portal networks. It is also essential that the EDGE NQ runs on a 2.4GHz band on your router.
Where possible, avoid the use of powerline adapters, Wi-Fi signal boosters/extenders as these can disrupt the reliability of the network connection.
Connecting to a Wired Network
1. Connect a network cable (Category 5/5E straight-through Ethernet cable) between the EDGE NQ and your router.
2. Your EDGE NQ will now automatically connect to the network.
Connecting to a Wireless Network (iOS)
Important note: Do not plug/unplug the wireless dongle when the unit is on.
1. Ensure that your EDGE NQ is in range of your wireless router, and then power on your unit.
2. On an iOS device go to Wi-Fi settings and under 'SETUP NEW AIRPLAY SPEAKER' select 'Edge NQ (ef)'.
3. Once connected, to complete unit setup download and install the StreamMagic app from the Apple App store.
Connecting to a Wireless Network (Android)
Important note: Do not plug/unplug the wireless dongle when the unit is on.
1. Before attempting to connect your EDGE NQ to your wireless network, download and install the StreamMagic app from the Google Play store.
2. Ensure that your EDGE NQ is in range of your wireless router, and then power on your unit.