Yamaha WOLVERINE R MAX 2021 Manual page 40

Clock, hour meter, voltage display and
coolant temperature display
1
5
1. Clock/Hour meter/Voltage display/Coolant temperature
display
2. "MODE" button
3. "SELECT" button
4. "RESET" button
The clock displays time in 12-hour format.
The hour meter shows the total time the en-
gine has been running. The voltage display
shows the battery voltage. The coolant tem-
perature display shows the temperature of
the coolant.
2 3 4
Push the "MODE" button to switch between
the clock "CLOCK", the hour meter "HOUR",
the voltage display "VOLT", and the coolant
temperature display " " in the following or-
der:
CLOCK → HOUR → VOLT →
To set the clock
1. Set the display to the clock.
2. Push both the "SELECT" button and
"RESET" button until the hour digits start
flashing.
3. Use the "RESET" button to set the hours.
4. Push the "SELECT" button, and the mi-
nute digits will start flashing.
5. Use the "RESET" button to set the minu-
tes.
6. Push the "SELECT" button, and then re-
lease it to start the clock.
5-9
→ CLOCK