Lifting The Motorcycle With The Front Lifting Gear - Husqvarna Svartpilen 250 2022 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.3
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
52
402029-10
F02808-11
402029-10

Lifting the motorcycle with the front lifting gear

F02809-10
Condition
Rear wheel was not removed.
–
Secure the motorcycle against falling over.
–
Remove the rear lifting gear and lean the vehicle on side
1
stand .
–
Remove bushings kit.
Info
Do not ride with the bushings mounted, as the
bushings can collide with the main silencer.
–
Mount and tighten screw
Guideline
Screw, license M10x30
plate bracket
Condition
Rear wheel was removed.
–
Secure the motorcycle against falling over.
–
Remove the rear lifting gear and lean the vehicle on side
1
stand .
–
Remove bushings kit.
Info
Do not ride with the bushings mounted, as the
bushings can collide with the main silencer.
–
Install the license plate bracket. (
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
1
Remove protection cap
2
.
30 Nm (22.1 lbf ft)
®
Loctite 243™
p. 60)
p. 51)
.