Auxiliary Dc Connectors; Ssv Works ® Audio System - Yamaha WOLVERINE RMAX4 Owner's Manual

To use an auxiliary DC jack
1. Start the engine. (See page 7-2.)
2. Turn the headlights off. (See page 5-16.)
3. Make sure the accessory is off.
4. Open the auxiliary DC jack cap.
5. Insert the accessory power plug into the
jack.
6. Turn the accessory on.
5
TIP
 Turn off the accessory before plugging in-
to/unplugging from the jack.
 When the auxiliary DC jack is not being
used, cover it with the cap.
ECB02111
NOTICE
 The combined load of the accessories
connected to the front and rear auxiliary
DC jacks must never exceed the stated
maximum capacity. Exceeding the maxi-
mum capacity may overload the circuit
and cause the fuse to blow.
 If accessories are used while the head-
lights are on and/or without the engine
running, the battery may discharge.
 Do not use an automotive cigarette light-
er or other accessories with a plug that
gets hot, because the jack can be dam-
aged.
EBU39460

Auxiliary DC connectors

This vehicle is equipped with auxiliary DC
connectors. Consult your Yamaha dealer be-
fore installing any accessories.
EBU39921
®
SSV Works audio system
This vehicle is equipped with SSV Works
audio system. Read the SSV Works
User Guide for more information.
5-40
®
®
MRB3