Image Overlay - Nikon D3S User Manual

A
Zoom
To zoom in on the image displayed in the
monitor, press N, rotate the main command
dial to the right, and then release the N button.
The histogram will be updated to show data only
for the portion of the image displayed in the
monitor. To choose the area displayed using
zoom, press N and use the multi selector. To
exit zoom, press the N button and rotate the main command dial to
the left.

Image Overlay

Image overlay combines two existing NEF (RAW) photographs to
create a single picture that is saved separately from the originals;
the results, which make use of RAW data from the camera image
sensor, are noticeably better than photographs combined in an
imaging application. The new picture is saved at current image
quality and size settings; before creating an overlay, set image
quality and size (0 83, 86; all options are available). To create a
NEF (RAW) copy, choose an image quality of NEF (RAW).
1
Select Image overlay.
Highlight Image overlay and
press 2. The dialog shown at
right will be displayed, with
Image 1 highlighted.
G button N retouch menu
U
349