Wireless and Ethernet Networks
If the optional WT-4 wireless transmitter (0 372) is attached,
photographs can be transferred or printed over wireless or
Ethernet networks and the camera can also be controlled from
network computers running Camera Control Pro 2 (available
separately). The WT-4 can be used in any of the following modes:
Mode
Upload new or existing photographs to computer or ftp
Transfer mode
server.
Thumbnail
Preview photographs on computer monitor before
select mode
upload.
Control camera from computer using
PC mode
Camera Control Pro 2 (available separately).
Print JPEG photographs on printer connected to network
Print mode
computer.
For more information, see the WT-4 user's manual. Be sure to
update to the latest versions of the WT-4 firmware and supplied
software.
A
Camera Control Pro 2
Camera Control Pro 2 (available separately; 0 375) can be used to
control the camera from a computer. When Camera Control Pro 2 is
running, "c" will be displayed and the exposure indicator will blink in
the top control panel.
A
Movies
The WT-4 can be used to upload movies in transfer mode if Auto send
or Send folder is not selected for Transfer settings. Movies can not be
uploaded in thumbnail select mode.
A
WT-4A/B/C/D/E
The principal difference between the WT-4 and WT-4A/B/C/D/E is in the
number of channels supported; unless otherwise stated, all references
to the WT-4 also apply to the WT-4A/B/C/D/E.
Function
Q
257