Table of Contents
Advertisement
–
The files "StandbySW_xxxxx_exhex.hex" and
"StandbySW_xxxxx_dev.upg" may not be used by
Service technicians (only for development purposes).
•
UpgradeAll_Q5492_x.x.x.x_commercial.zip. Only for
production purposes, not to be used by Service
technicians.
Caution: Never try to use this file, because it will
overwrite the HDCP keys ! ! !
•
UpgradeExe_Q5492X_x.x.x.x.zip. Not to be used by
Service Technicians.
•
Ambilight_Q5492_x.x.x.x.zip. Not to be used by Service
technicians.
•
Cabinet_Q5492_x.x.x.x.zip. Not to be used by Service
technicians.
•
Display_Q5492_x.x.x.x.zip. Not to be used by Service
technicians.
•
LightGuide_TV522_x.x.x.x_.zip. Not to be used by
Service Technicians.
•
ProcessNVM_Q5492_x.x.x.x.zip. Default NVM content.
Must be programmed via ComPair or can be loaded via
USB, be aware that all alignments stored in NVM are over
written here.
5.9.5
Content of the MOP Ambilight ARM SW File
•
MOP_AMBILIGHT_V1-2_UPG_jettsigned.zip. Contains
the MOP ambient light software (ARM processor on the
DC-DC AL interface board) and is upgradeable via USB
(UPG). This SW is not part of the FUS autorun.upg! and is
not available in the One-Zip software file but provided
separately via the commercial Philips website (software for
service engineers only).The way of work on how to
upgrade is included in the zip file.
5.9.6
UART logging 2K9 (see section
Repair
Tips,
5.8.6
Logging)
Service Modes, Error Codes, and Fault Finding
"5.8 Fault Finding and
Q549.6E LA
5.
EN 35
2009-May-29
Advertisement
Table of Contents
