Table of Contents
Advertisement
When handling the M.2 solid-state drive, observe the following guidelines:
• Remove or insert horizontally. Otherwise the slot might get damaged.
• Replace the M.2 solid-state drive only for repair. The M.2 solid-state drive is not designed for frequent
changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 47.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 48.
Removal procedure (for ThinkPad Z13 Gen 2)
1. Remove the screws that secure the M.2 solid-state drive and bracket.
2. Pull the transparent tab to remove the bracket.
3. Remove the drive out of the slot horizontally.
50
ThinkPad Z13 Gen 2 / ThinkPad Z16 Gen 2 User Guide
Advertisement
Table of Contents
