Rinnai RJ12RML User Instructions page 20

Important Safety Instructions
Regarding installation
 Do not install the appliance at outdoor.
 Minimize pipe length and avoid dead legs and stagnant corners in hot water pipework.
 Minimize the distance between hot water outlet and water tap.
 When installing the flue terminal, make sure the flue gas does not discharge directly to
the outside walls, windows, glass, mesh doors or aluminum sashes etc. This could cause
material disfiguration or discolouration.
What you must do to prevent fire
 Do not place flammable materials, such as paper, wood or
clothes, around the appliance or flue terminal.
 Do not place or use volatile materials, such as gasoline or
benzene, around the appliance or flue terminal.
 Do not place or use spray cans, such as hair spray or spray
cleaners, around the appliance or flue terminal.
Regarding use
 This appliance is intended for residential application only. Do not use it for commercial
application lest its service life is shortened.
 Do not use water from the appliance for drinking or cooking.
 This appliance is intended for supplying hot water to bathroom and kitchen. Do not use it
for other purpose in order to avoid incident or damage of appliance.
What you must do to prevent scalding
 When turning on the tap again after using hot water or quickly reducing
the hot water flow, relatively high-temperature hot water may suddenly
come out. As there is a risk of being scalded, do not direct the hot water
onto your head or body.
 When using the shower, relatively high-temperature hot water may
come out first. In order to prevent scalding, check the hot water
temperature with hand first. Do not direct the hot water onto the head or
body.
 Do not touch the flue terminal to prevent from scalding.
Caution
3
Flue Terminal
Check hot water
temperature with
hand first
Do not touch flue
terminal