LG F4Y7 BTA1 Series Owner's Manual page 36

global_main.book.book Page 36 Monday, April 17, 2023 4:37 PM
OPERATION
36
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
Using the ezDispense
Use the Dispenser 1 and Dispenser 2 buttons to
set up and control the ezDispense function.
a Dispenser 1 button
Dispenser 2 button
b
c Buttons indicator
d Liquid detergent indicator
Link indicator (Using only liquid detergent both
e
compartments)
Buttons indicator
f
g Liquid fabric softener indicator
NOTE
• Whether the detergent or softener indicator may
blink and the chime may sound, even if there is
sufficient detergent or softener left to use for
approximately 2 to 4 washing programmes;
- If the liquid detergent indicator
buttons indicator ,
c
sounds, pour the detergent into the
compartment, up to the MAX line.
- If the liquid fabric softener indicator
buttons indicator blink and the chime
f
sounds, pour the fabric softener into the
compartment, up to the MAX line.
• The default settings are configured to dispense
the detergent of Dispenser 1 and the fabric
softener of Dispenser 2.
Changing Dispense Level for a Single
Load
1
Press the Power button.
2
Turn the knob to select the desired cycle.
3
Press the Dispenser 1 or Dispenser 2 button
to increase or decrease the dispensed amount
from the set defaults.
Buttons Indicator
*1 The default settings are configured to
dispense 42 ml of detergent and 30 ml of
softener for 4-6 kg of normally soiled
laundry.
and
d
blink and the chime
f
and
g
*1
Dispensed Amount
More (110%)
Medium (100%)
Less (90%)
Off (0%)