Installation and operation manual
16.
Mechanically open
13.
15.
14.
16.
17.
Automatic discharge
13. Screw the housing body back onto the housing head
Make sure that the safety slide is facing the front after
set up.
14. Push the safety slide upwards
15. Tighten the locking screw on the safety slide
16. Slowly open the shut-off valves upstream and
downstream of the separator or the respective system
section
17. Set the knurled screw on the float drain anti-clockwise
(left-hand thread) from >>Mechanically open<< to
>>Automatic discharge<< by unscrewing the knurled
screw as far as it will go
CLEARPOINT
water separator
®
35 | 56