Replacing The System Outer Foil And The Inner Blades - Panasonic ES ST6S Operating Instructions Manual

• Be careful not to hit the main body on the sink or any
other object while draining the water. Failure to do so
may cause malfunction.
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
Do not use any brush other than the supplied one.
►Cleaning with the long brush
Clean the foil frame, system
outer foil, the main body and the
trimmer using the long brush.
►Cleaning with the short brush
• Clean the inner blades using the
short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the blades
as it will damage the inner blades
and affect their sharpness.
18
ES-ST6S_2S_TW.indb 18
Replacing the system outer foil and
the inner blades
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift
the outer foil section upwards.
►Attaching the outer foil section
After turning the water inlet surface to the
front, securely attach the outer foil section
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
• Do not press the system outer foil
release buttons with excessive
force.
Doing so may bend the system
outer foil, preventing complete
attachment to the foil frame.
2. Align the water inlet surface and the
system outer foil mark ( ) and
securely attach together until it clicks.
2020/12/22 16:48:52