Cleaning The Shaver - Panasonic ES ST6S Operating Instructions Manual

Operation and display of the switch lock
►Locking the power switch
1. Press once 2. Press
and then
more than
release. 2 seconds.
• The shaver
• The switch
starts
operating.
• The shaver will
16
ES-ST6S_2S_TW.indb 16
for 3. Release
lock lamp
( ) will light
up for
5 seconds
and turn off.
stop operating.
►Unlocking the power switch
1. Press for more than
2 seconds.
• The switch lock lamp
.
( ) will turn off.
• The power switch is locked when the switch lock lamp
( ) blinks for 5 seconds and the shaver does not
operate even though the power switch is pressed.

Cleaning the shaver

We recommend cleaning the shaver after each use.
1. Turn the shaver off and disconnect the
AC adaptor.
2. Apply some hand soap and some water
to the system outer foil.
• Close the cleaning shutter.
3. Turn the shaver on and make foam for
a few seconds.
• Hold the power switch for 2 seconds or
more to switch to shaving foam mode.
2. Once the shaver starts
operating, release .
▼
2020/12/22 16:48:50