Coleman 90363E Owner's Manual page 8

7. All SOFAs shall be installed in accordance with the manufacturer's installation
instructions.
• No modification shall be made to a SOFA structure or flow path unless the new
configuration has been certified to the original SOFA.
• These SOFA-configuration specific flow ratings NOT be exceeded at any time the pool
is open to bathers.
• Cover/grates, when installed, shall not protrude more than 2 in. (51 mm) from the
finished surface of the pool in which the SOFA is installed.
8.
Installation Information label (Copy)
Manufacturers name: Bestway (Nantong) Recreation Corp.
Cover part number: S01
Life expectancy: 3 Years
Cover flow rating: 20 GPM
Configuration and installed orientation: Wall
Location: Spa Pool liner
Date of installation:_______________
Installer need to fill in the balance of information and give it to the pool owner, to
be kept with other important pool related documents.
Please research and download General Certificate of Conformity through
www.bestwaycorp.com
SAVE THESE INSTRUCTIONS
IMPORTANT:
is smooth, flat, level and capable of supporting the weight for the entire time the
SaluSpa is installed (not on the carpet or other similar material). If the SaluSpa is
placed on a surface which does not meet these requirements, any damage caused
by improper support is not covered under the manufacturer's warranty. It is the
responsibility of the SaluSpa owner to assure the integrity of the surface at all times.
1. Indoor Installation:
Be aware of special requirements if you install the spa indoors.
• Humidity is a natural side effect with SaluSpa installation. First determine the
effects of moisture on exposed wood, paper, etc. in the proposed location. To
minimize these effects, it is best to provide plenty of ventilation to the selected
area. An architect can help determine if more ventilation is needed.
2. Outdoor Installation:
• During filling, draining or when in use, water may spill out of the spa. Therefore the
SaluSpa should be installed near a floor drain.
• Do not leave the spa surface exposed to direct sunlight for long periods of time.
SELECTED LOCATION
Due to the combined weight of the SaluSpa, water, and users, it is
extremely important that the surface where the SaluSpa is installed
8